Monthly Archive: July 2017

Roofing and Roofing Shingle Tips

When you’re considering new roofing in Elmira, New York or the surrounding area, it helps immensely to know a little about roofing.

A shingle that shows 3 tabs is fittingly known as a 3-tab roofing shingle. They are normally guaranteed for 20 years and help the roof to have a smooth, defined look.

Depending on the manufacturer, 3-tab shingles are often available in 20, 25 or even 30 year limited warranties. They are generally available in a variety of colors. It is also important to note that 3-tab roofing shingles are some of the most cost-efficient shingles to use on your home.

Are 3-Tab Roofing Shingles For You?

Before deciding on 3-tab roofing shingles for your home, check with your local homeowner’s association. In addition to certain restrictions that each association may have, some do not allow the use of 3-tab shingles. This may be true in areas that are prone to high wind or other inclement weather but check with your local building requirements to be sure.

Replacing 3-Tab Roofing Shingles

If you need to replace 3-tab roofing shingles, you can either do the job yourself or hire a professional roofing contractor such as Dewalt and Sons roofing in Corning and Elmira New York.

Whether you decide to take the job on yourself or hire a professional, make sure that whoever does the job takes the time to choose a warm, dry day.

Do not work on the roof if it is wet or slippery. Once you’re on the roof, carefully pry the tabs of the shingles upward, which overlap the damaged one. Loosen the tabs and the adhesive on the back of the shingle. Work carefully to avoid damage to the neighboring shingles.

If you lift too many tabs on good shingles, they may crack. For the shingle that you are removing, look for the nails holding it into place and remove them as well. Once the shingle is out, remove any debris from that area before placing the new shingle. With your new shingle in hand, search for the adhesive strips near the bottom of each of the 3 tabs. Slide the new shingle into place and secure it with nails. You may use roofing cement to secure the overlaying tabs.

For more information on roofing, siding, fencing and remodeling in Elmira New York and the surrounding areas, please contact Dewalt and Sons roofing.

Finding a Great Computer Job

Got a difficult problem in your job search?

Say, a lack of networking contacts? Or trouble answering interview questions?

Well, you’ve got company. Problems in a job search are as common as mosquitoes in July.

But … have you ever written your problem down on a piece of paper?

I’ll bet you haven’t.

Because, when you write problems down, you take an immediate, huge leap towards solving them. Think about it: Every great invention or solution, from the atomic bomb to the Xbox, was first worked out on paper.

Why not solve your employment problems the same way?

Here’s a three-step method that will help you do it …

1) Start by asking the right questions
Most folks put themselves behind the eight ball in their job search by asking questions that are depressing and demotivating.

Questions like, Why won’t anyone give me a job? or How do I network when I don’t know anyone?

Ack. Pass the happy pills.

Instead, start asking questions that motivate and inspire you.

Better questions to ask are:

How could I give people a reason to call me with job leads?
Which job recruiter can I use that will help me to find a better job or a better career path.
How did my 10 closest friends find their current jobs?
How could I brainstorm with them and use their methods in my job hunt?
What worked in my last job search? The job search before? How could I do that again?

Important: Ask questions that you yourself can solve. Never depend on the government, your school, parents, family — anyone else — to do this for you. Because, once you give up responsibility for solving problems with your job search (or anything else), you become a prisoner of outside forces.
Find someone that you trust to help you, whether that is a job recruiter or a counselor or someone else.

When you ask the right questions, however, you’re halfway to the answer. So write down at least five empowering questions about your job search, right now.

Then, you’re ready for step two …

2) Brainstorm at least 20 possible answers
After you write down five good questions, circle the one question that looks most promising. You’re going to use it to get hired faster.

Let’s say you write the following question down atop a clean sheet of paper:

How could I give people a reason to call me with job leads?

Write a number 1 below it. Write a possible answer next to that number. Then move on to number 2, 3 . and don’t stop until you have at least 20 answers to your question.

Not 15 or 19, but 20 answers — or more.

There’s a reason for this: Left to its own devices, your brain will pull a Homer Simpson after two minutes and try to talk you into going out for donuts or beer. Brains hate to think. Like bench pressing, thinking is strenuous work, no matter how good it may be for you.

But don’t let your head off the hook. Don’t stop until you get 20 possible solutions. Brainstorm as if your career depended on the outcome. Because it does.

Now. Most of your 20 answers won’t be very good — that’s OK. Your best answer may come right after the most hare-brained. By forcing yourself to write out 20 answers, you’re flushing the creative pipes while going deep into your subconscious mind to dredge up a winner.

Don’t knock it until you try it!

3) Take action on one solution today
Choose the most promising from your list of 20 answers. Then, get started — today — to make it happen. No excuses.

Let’s say the most actionable of your solutions is to throw a networking party where you can meet friends, family and acquaintances, and let them know about your job search.

Now. What do you need to do to make this party happen?

Well, you have to make the guest list, send invitations, get the food, etc. So write down all the sub-goals necessary for the party to be a success. Check each sub-goal off your list as you complete it. Before you know it, your networking party will be a reality.

After that, take the next most-promising solution from your list of 20 and make that one happen. Repeat until hired.

Here’s why these 3 steps work when it comes to solving problems — clear thinking plus continuous action equals results.

If you’re struggling to find a job, write down clear, empowering questions of your situation. Then, brainstorm at least 20 possible solutions and take action on the best one today. When you do, you’ll be that much closer to getting the job you really want, faster.

If you’re loooking for other tips on finding the best computer jobs, contact the helpful folks at

3 easy to teach dog tricks

To teach your dog tricks even easy ones you need to have some small reward treats, be in a quiet suitable place and keep the training sessions to 10 – 15 minutes or your dog will start to get board, remember when he gets something right lots of praise and a reward treat, just be careful not to get him over excited or he will loose concentration.

Getting your dog to give you his paw, first get your dog to sit, then as you say the word ‘paw’ take your dogs paw in your hand, give the dog a treat, repeat this, after a few times do not take his paw so quickly, say the word, count to one then take it, you should notice he is bringing his paw up as you say the word if he does not go back to saying it at the same time, do it a few more times then slow your response again. After 2 or 3 sessions most dogs pick this one up quite happily.

The high five, like a lot of tricks the high five is a progression of an earlier trick, in this cast the paw trick. Hold a treat in your fingers and raise your hand slightly higher than you would for the paw trick. You dog will think you want to do the paw trick and will reach for the treat with his paw as we taught him earlier, as he reaches up you say “high five” and give him the treat. Once your dog has mastered the paw trick this one should be very easy to learn and with just a few sessions he will be doing it on hand signal rather than voice control.

Getting your dog to jump through a hoop, before you start this one I would just like to ask you to be a little sensible and not hold the hoop too high as you do not want your dog to heart himself while doing the trick. Sit your dog on one side of a hoola hoop, get the dogs attention on your hand on the other side of the hoop take a treat in your hand and give the dog the command to release him from the sit, at first he may attempt to go around or under the hoop, if this happens start again, your dog wants the treat and will soon learn that going around or under does not get it so he will soon start going through it, when he does say hoopla and give him the treat. He will soon be jumping through the hoop on the command of hoopla. When I started doing this trick I had a medium sized dog (a Labrador) so I started with the hoop 6 inches from the ground and slowly raised it to waist height, if you have a smaller dog you might want to start with the hoop touching the ground so the dog just goes through the hoop and then slowly raise it as he gets used to the trick.

For more information about pets or pet grooming, visit http://myownly.com